Electronic Barriers & Gates

Swing Gates

Steel Gates

All gates are individually fabricated to a size and design specified by the customer. We have shown some of our more standard designs although these can be altered with different railheads, baskets, bar sizes and even colour. Manufactured with a 40mm x 40mm square hollow section (shs) outer frame and 20mm x 20mm shs vertical bars the gate is hot dipped galvanised and powder coated for durability.

Timber Gates

Timber gates have to be extremely well manufactured to withstand the stresses imposed by automation. We have seen some gates made by other joiners fall apart after a few months of operation. Our gates are made with automation in mind and have a minimum finished thickness of 65mm. Available in a variety of woods, redwood, Emery the gate will have a clear basecoat and require further treatment by the customer unless specified.

Sliding Gates

A sliding gate does not need the space a swing gate requires to open.  This leaves the full length of the driveway useable for parking vehicles. (useful when space is restricted).  A closed sliding gate offers better resistance to being forced than a pair of swing gates and therefore higher security.  Sliding gates will work across an upward sloping driveway where a pair of swing gates would not open inward.

We provide a range of sliding gate motors for all applications.  From single user domestic gates of 150 kilos to continually used industrial ‘sliders’ weighing upto 4000 kilos we have the right motor for the job.

Automated Barriers

For commercial and industrial premises we provide a range of traffic control bollards and rising arm barriers to suit a variety of applications.

These are fast acting systems, moving from open to closed positions in 3 to 8 seconds and suitable for busy entrances where an automated gate would be too slow.

Barriers and bollards are used both stand alone, and in conjunction with security gates which are closed out of normal business hours to provide intruder security.

BGV Barriers

For commercial and industrial premises we provide a range of traffic control bollards and rising arm barriers to suit a variety of applications.

These are fast acting systems, moving from open to closed positions in 3 to 8 seconds and suitable for busy entrances where an automated gate would be too slow.

Barriers and bollards are used both stand alone, and in conjunction with security gates which are closed out of normal business hours to provide intruder security.

24V DC Barrier 6000mm and 8000mm models

The 24V DC motor allows for an intensive duty cycle to suit commercial / industrial applications and busy entrances.

Designed for large spans upto 8000mm.

Barrier control options

Barriers are supplied with integral multi function control panels , allowing connection to the full range of control and safety. Barriers are supplied with:

• Card reader
• Intercom System
• Digital entry pad
• Radio control
• Loop system

Bollards

Traffic control that disappears flush with ground level.

Aesthetically pleasing and impassable to traffic.

Rising bollards provide a neat solution to preventing the passage of vehicles without the requirement for gates and have a minimal impact on the environment for town centres and historic areas.

Typical uses:

• Residential & commercial entrances.
• Traffic lane control
• Anti ram raid for shopping precincts.
• Control of pedestrianised areas / traffic limitation
• Replacement of rising arm barriers in vandal problem areas